Installation Guide
Table Of Contents
- OpenWay Riva Gas Disconnect Installation Guide
- Table of Contents
- 1 Important Safety and Compliance Information
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Electromagnetic Compatibility
- Intrinsic Safety
- Lithium Battery
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Aluminum Enclosure
- Electrostatic Discharge
- Electrostatic Ignition Hazard
- Device Cleaning
- Do Not Drop
- Product Notification
- 2 OWRGD Installation Guide Overview
- 3 About the OpenWay Riva Gas Disconnect
- 4 Installing the OWRGD
- 5 Connecting the Flood Sensor to the OWRGD
- 6 OWRGD Operations
5. Using the valve tool, turn the valve shaft clockwise to lock the valve into the open position.
Important! Turn the valve tool until you hear a click indicating the valve locked
into position. You will feel the physical vibration of the valve clicking (engaging).
Perform a Check Endpoint/Valve Status on page 29 to confirm the valve is
connected.
Disconnect
If there is a need to disconnect the gas service, follow these instructions to close the OWRGD
valve.
Disconnect Instructions
1. Enter the OWRGD endpoint ID.
2. Using FDM Tools, select Disconnect.
3. Click Next.
The following screen appears:
4. Click Yes or No.
A confirmation appears indicating the valve is closed.
14 August 2020 815-0382-00 32
OpenWay Riva Gas Disconnect Installation Guide 6 OWRGD Operations