Installation Guide
Table Of Contents
- OpenWay Riva Gas Disconnect Installation Guide
- Table of Contents
- 1 Important Safety and Compliance Information
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Electromagnetic Compatibility
- Intrinsic Safety
- Lithium Battery
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Aluminum Enclosure
- Electrostatic Discharge
- Electrostatic Ignition Hazard
- Device Cleaning
- Do Not Drop
- Product Notification
- 2 OWRGD Installation Guide Overview
- 3 About the OpenWay Riva Gas Disconnect
- 4 Installing the OWRGD
- 5 Connecting the Flood Sensor to the OWRGD
- 6 OWRGD Operations
2. Verify the gas flow is in the direction noted by the arrow on the body of the OWRGD valve.
3. Apply pipe sealant on the pipe.
Caution: Do not leave loose tape or excess pipe sealant on the pipe connections.
4. Thread the OWRGD onto the inlet pipe (or riser).
5. Tighten the connection with a pipe wrench.
6. Thread the outlet pipe into the OWRGD outlet.
7. Tighten the connection with a pipe wrench.
8. Complete meter set piping as appropriate.
14 August 2020 815-0382-00 21
OpenWay Riva Gas Disconnect Installation Guide 4 Installing the OWRGD