Installation Guide
Table Of Contents
- Contents
- Important Safety and Compliance Information
- USA, FCC Part 15 spectrum compliance
- Canada, ISED spectrum compliance
- RF Exposure (FCC/ISED)
- Electromagnetic compatibility
- Telemetering equipment classification
- Intrinsic safety
- Lithium battery
- Transportation classification
- Modifications, repairs, installation, and removal
- Aluminum enclosure
- Electrostatic discharge
- Electrostatic ignition hazard
- Device cleaning
- Do not drop
- Product notification
- OpenWay Riva Gas Remote Disconnect Installation Guide Overview
- About the OpenWay Riva Gas Remote Disconnect
- Installing the OpenWay Riva Gas Remote Disconnect
- Connecting the Flood Sensor to the OpenWay Riva Gas Remote Disconnect
- OpenWay Riva Gas Remote Disconnect Operations
Warning: Check all connections for gas leakage and repair if necessary
.
Installing the flood sensor
Warning: Do not paint the flood sensor
.
Mounting the flood sensor on the pipe
Mounting the flood sensor on a pipe requires a user-supplied band clamp large enough to
secure the sensor to the pipe.
Important:
Mount the flood sensor on a vertical (2) or horizontal (1) pipe using the bottom
pipe cradles and top and side bracket guides. The arrow on the flood sensor housing must
point up after installation.
1. Position the flood sensor on the pipe using the correct pipe cradle for the pipe's
orientation.
Installing the OpenWay Riva Gas Remote Disconnect
OpenWay Riva Gas Remote Disconnect Installation Guide TDC-1759-000 16
Proprietary and Confidential