Installation Guide
Table Of Contents
- OpenWay® Riva CAM3S and CAM3M Installation Guide
- Table of Contents
- New in this Document
- 1 About This Guide
- 2 Introduction
- 3 Installation Kits
- 4 Star and Mesh Deployment Installation
- 5 Radio Frequency and Power Line Carrier Installation
- 6 ACT Coupler Unit Installation (CAM3M Only)
- 7 Replacing an Existing CAM with a New CAM3S/CAM3M in the Field
- A Specifications
- B RF Filter Installation
- Glossary
- Index
Type Items Details
Operating Conditions Temperature -25°C to +70°C (-40°F to +158°F)
Relative Humidity 5% to 95% non-condensing
Shock IEC 68-2-31, operating, 50mm
Vibration IEC 68-2-31 to levels from IEC 721-3-2
Non-Operating
Conditions
Temperature -25°C to +70°C (-40°F to +158°F)
Relative Humidity 5% to 95% non-condensing
Altitude 3014m (10,000 feet); maximum operating temperature is
derated with increasing altitude per IEEE 1613a-2008
Weight CAM3S/CAM3M 365g, (12.88oz)
Agency Approvals FCC parts 1, 2, and 15, Class B
Canada ISED (Innovation, Science and Economic Development) Compliance
ISED RSS 102, RSS 210, RSS 247 and RSS GEN
Or other regulators depending on country or region the CAM3 is configured for.
* Frequency Range and Radio Output Power vary depending on what country or region the CAM3 is configured for.
Table 91CAM3S/CAM3M Technical Specifications (continued)
02 March 2020 815-0080-00 Itron, Inc. Page 90 of 102
OpenWay® Riva CAM3S and CAM3M Installation Guide A Specifications