Installation Guide
Table Of Contents
- OpenWay® Riva CAM3S and CAM3M Installation Guide
- Table of Contents
- New in this Document
- 1 About This Guide
- 2 Introduction
- 3 Installation Kits
- 4 Star and Mesh Deployment Installation
- 5 Radio Frequency and Power Line Carrier Installation
- 6 ACT Coupler Unit Installation (CAM3M Only)
- 7 Replacing an Existing CAM with a New CAM3S/CAM3M in the Field
- A Specifications
- B RF Filter Installation
- Glossary
- Index
A
Specifications
The following table lists the technical specifications.
Type Items Details
Connectors RF 1 - antenna port, QMA female
PLC Single 1 - 6-Pin male, 2.5mm size
Communications Frequency Hopping Spread
Spectrum
Depending on regulatory domain and mode
For USA/Canada: 64 or 512 channels Number of
channels will vary for other countries and regions.
RF Band 915MHz ISM
RF Operational Bands (Riva) Frequency Range* 902 to 928MHz
Radio Output Power* 500mW to 1W
RF Modulation Options 802.15.4g OFDM option
3
200kbps to 600kbps Max.
Data Rate
802.15.4g FSK 10kbps to 150kbps Max.
Data Rate for initial
CAM3S/CAM3M
Long Range Mode
DSSS
12.5kbps Max. Data Rate
OpenWay Mesh Modulation
Options
OFDM Option3 600kbps
OFDM Option3 200kbps
FSK 150kbps
DSSS Long Range
Mode
12.5kbps
PLC Modulation Options D8PSK 200kbps Max. Data Rate
DQPSK 165kbps Max. Data Rate
DBPSK 100kbps Max. Data Rate
ROBO 34kbps Max. Data Rate
Physical Dimensions CAM3S/CAM3M 13.7cm H x 12.0cm W x5.4cm D, (5.4" H x 4.7" W x 2.1"
D)
Table 91CAM3S/CAM3M Technical Specifications
02 March 2020 815-0080-00 Itron, Inc. Page 89 of 102