Installation Guide
Table Of Contents
- OpenWay® Riva CAM3S and CAM3M Installation Guide
- Table of Contents
- New in this Document
- 1 About This Guide
- 2 Introduction
- 3 Installation Kits
- 4 Star and Mesh Deployment Installation
- 5 Radio Frequency and Power Line Carrier Installation
- 6 ACT Coupler Unit Installation (CAM3M Only)
- 7 Replacing an Existing CAM with a New CAM3S/CAM3M in the Field
- A Specifications
- B RF Filter Installation
- Glossary
- Index
3. Screw the remote antenna base into the top of the remote mount adapter plate.
Figure 29Remote Antenna Base to Remote Adapter Plate
4. Push the silicone seal down over the top of the remote mount adapter plate.
Figure 30Silicone Over the Remote Mount Adapter Plate
5. Slide the antenna holder over the silicone seal.
02 March 2020 815-0080-00 Itron, Inc. Page 40 of 102
OpenWay® Riva CAM3S and CAM3M Installation Guide 4 Star and Mesh Deployment Installation