Installation Guide

Specification Itron Part Number
KIT-0049-001
Itron Part Number
KIT-0073-001
Itron Part Number
KIT-0018-007
Cisco ANT-MP2-I-
OUT-M
Impedance 50 Ohms 50 Ohms 50 Ohms 50 Ohms
Termination Type N Male Type N Male Type N Male MCX jack
Overall length 18.8" 18.8" 65" 3.04”
Radome diameter 1" OD 1" OD 1.31" OD 1.61" OD
Power rating 50W 50W 100W 10W
Lightning protection Direct ground Direct ground Direct ground n/a
Mounting arm
length
n/a n/a ~8 in. Direct mounted
Weight (w/o
clamps)
1 lb. 0.7 lbs. 3 lbs. 0.2 lbs.
Maximum wind
speed
160 mph 160 mph 125 mph 165 mph
Wind load @ rated
wind speed
n/a n/a 57 lbs. n/a
Table 7Supported 915MHz Antenna Specifications (continued)
Note: To reduce potential radio interference to other users, select an antenna type with gain
such that the Equivalent Isotropically Radiated Power (EIRP) is not more than permitted by
the regulatory rules of the country where installed.
Note: The 8.15dBi antenna kit (KIT-0018-007) comes with a lightning arrestor that is for
other types of installations and is optional. The lightning arrestor that is included with the RF
Filter kit (KIT-9036-001) is the correct arrestor for this application.
915MHz 5.5dBi Remote Antenna Kit
The following items are included in the Remote Antenna installation kit (KIT-0073-001):
■
915MHz 5.5dBi gain antenna
■
Antenna mounting kit:
Remote-mount adapter
Antenna holder
Mounting bracket
6-inch bolts (4)
1¾-inch bolts (2)
02 March 2020 815-0080-00 Itron, Inc. Page 19 of 102
OpenWay® Riva CAM3S and CAM3M Installation Guide 3 Installation Kits