User Manual

CGR ACT Coupler
Unit Installation
OpenWay® Riva™ CAM / ACT Coupler Unit 27
Install the CGR
1. Mount the CGR to the mounting bracket by sliding the mounting bolt in the top front position on each side
of the CGR into the corresponding slot on the mounting bracket.
Illustration Callout Number Description
1
Mounting bolt not completely removed
2
Mounting bolts to be completely removed
2. Insert the remaining three bolts on each side of the CGR into their respective places.
Note Insert all mounting bolts on each side before securing tightly.
3. Tighten all mounting bolts. Use a torque of 6-7 foot-pounds when tightening the bolts.