User Manual

OpenWay® Riva™ CAM / ACT Coupler Unit 21
This procedure is for installing a Cisco Grid Router (CGR) Adaptive Communications Technology (ACT)
Module (CAM) and the ACT Coupler Unit (ACU) to an existing pole mounted CGR application. To install
the CGR refer to the CGR installation procedure in the Cisco 1240 Connected Grid Router Hardware
Installation Guide.
Disconnect CGR Cables
Illustration Callout Number Description
1
CGR power cable
1. Disconnect the power source from the CGR and remove the power cable. This cable will be replaced by
the power cable provided in the coupler unit installation kit.
C H A P T E R 5
CGR ACT Coupler Unit Installation