User Manual

CAM Installation
for RF Only Applications
OpenWay® Riva™ CAM / ACT Coupler Unit 8
Illustration Callout Number Description
1
Antenna cable connection
2
WPAN antenna
4. Secure the black antenna wire from the WPAN antenna to the bottom antenna connector on the front of
the CAM.
5. Ensure the antenna cable is routed so that it does not interfere with door closure. Use a single plastic cable
tie to secure the antenna cable to the tie loop on the front of the CAM.
6. Close the door and secure by tightening the six captive bolts using the sequence shown below. Use a
torque of 6-7 foot-pounds when tightening the bolts.