User Manual

OpenWay® Riva™ CAM / ACT Coupler Unit Installation Guide 1
This document provides the procedure necessary to install the CGR ACT Module (CAM) and the ACT
Coupler unit (ACU) with the 1000 Series Cisco Grid Router (CGR). In addition to the physical installation of
the Adaptive Communications Technology (ACT) module and ACU, a procedure for loading the actd
application into the CGR Guest Operating System (GOS) is also provided. The actd application serves as a
communication gateway between the IOS and the CAM.
This document is intended for field installers that are familiar with the CGR, it’s function and operation. The
information in this document assumes that the CGR is properly installed and configured prior to installing the
CAM.
For further information about setting up the CGR refer to Cisco 1240 Connected Grid Router Hardware
Installation Guide.
C H A P T E R 1
About This Document