User's Manual

SSI OPENWAY 2.0 SmartMeter User Guide
SMR45-4601B 14
5 SSI OPENWAY 2.0 Display Feature
Note: These display codes are only visible when the SmartSynch Option Board type is selected
in the meter program and the option board fields are enabled.
1. SmartSynch Identifier: In general, the meter program controls the number of displays, associated
fields, and display time. This 3-letter field identifies SmartSynch display among available displays.
Note: This is a user defined field and can be changed by the customer.
Values Description
SSI SmartSynch, Inc.
2. SmartMeter Warning: displays error codes generated by SmartSynch embedded software.
−
−−
−

Normal operations – no errors
1

SmartMeter module’s NVRAM error
2

Read/write failure in the Common Configuration area - NVRAM
3

Read/write failure in the App. Specific Configuration area - NVRAM
4

Actual firmware binary image is corrupted
5

Firmware image decompression error
6

Meter clock deviation is greater than the maximum correction limit
7

Software watchdog triggered – processor is reset
 Good.  Warning. Error
3. Wireless Coverage Status: coverage status detected by the GPRS modem.
Values Description
1 In coverage: modem can hear the network
0 Out of coverage: modem can’t hear the network