ITR9002 Module for the Pole Mounted Router Technical Reference Guide Effective Date: May, 2019 ITR9002 Module
Revision History The following table describes the changes to this document for each revision of the ITR9002 router module: Revision A ITR9002 Module Date Description of Change May, 2019 Initial Release
Labeling The following requirements will be applied to any products that use these modules: The Pole Mounted Router (PMR) or host label will include the following text: • • • Contains: FCC ID: SK9ITR9002 Model: ITR9002 The user’s manual for any product that contains this modules will contain the following text. If the device is large enough, then this will also be placed on the label. “This device complies with Part 15 of the FCC Rules.
Changes or modifications to this device not expressly approved by Itron, Inc. could void the user’s authority to operate the equipment. RF Exposure (FCC) The user’s manual for any product that contains this module will contain the following text: “This equipment complies with radiation exposure limits set forth as a mobile classification for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
Test Modes Itron uses various test mode programs for test set up which operate separate from production firmware. Host integrators should contact Itron for assistance with test modes needed for module/host compliance test requirements. Recycling Information The product you have purchased contains circuit boards. At the end of the modules useful life, under various state and local laws, it may be illegal to dispose of certain components into the municipal waste system.
Installation The ITR9002 module will be installed in the Itron POLE MOUNT ROUTER (PMR). Install the ITR9002 module on the host board assembly..
ITR9002 Module
Install the shield that covers the ITR9002 module with only RF QMA connect exposed.
Connect USB in the ITR9002 module to the electronic assembly: ITR9002 Module
Install electronic assembly into PMR host: ITR9002 Module
Sealed PMR: ITR9002 Module