Installation Guide
Table Of Contents
- Intelis Gas Meter Installation Guide
- Table of Contents
- 1 Important Safety and Compliance Information
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Australia, ACMA Spectrum Compliance
- Electromagnetic Compatibility
- Intrinsic Safety
- Lithium Battery
- Transportation Classification
- Electrostatic Discharge
- Electrostatic Ignition Hazard
- Device Cleaning
- Do Not Drop
- Product Notification
- 2 Intelis Gas Meter
- 3 Installation
- 4 LCD Operation
- 5 Proving
- 6 Adjusting the Calibration
- 7 Maintenance
Itron recommends these Intelis Gas Meter Test Mode parameter settings for the Measurement
Systems proving system:
■
Test Mode pulse weight: 0.25 CF
■
Test Mode pulse width: 150 ms
Temper the Meter by Exercising the Meter
1. Open the Measurement Systems Proving System application software.
2. Select Meter Setup to exercise the meter.
11 December 2019 TDC-1782-005 42
Intelis Gas Meter Installation Guide 5 Proving