User's Guide
Table Of Contents
- Table of Contents
- Itron Mobile Radio compliance
- 1. Introduction
- 2. About Your Itron Mobile Radio
- 3. Daily Operation
- 4. LED Status Indicators
- 5. Communication Ports
- 6. Carrying the Portable Itron Mobile Radio
- 7. Installing the IMR-XA and IMR-FT
- 8. Maintaining your Itron Mobile Radio
- 9. Storing Your Radio
- 10. Battery Basics
- 11. Safety
- 12. Troubleshooting
- 13. Optimizing Bluetooth® Performance
- 14. Itron Mobile Radio Capabilities and Limitations
The device name is IMRnnnnnn where n equals the last six digits of the serial number of
the device you are trying to pair with.
5.
Select your device and click PAIR.
A tabbed dialog box for the radio appears.
6. Select the Services tab.
7. Verify that the Serial port is selected. This must be selected for the radio to connect.
If the Serial port check box is not selected, select it and click OK.
8. Close the Itron Pairing Tool.
9.
Select your radio from the list of radios in Itron Mobile for FCS.
14 May 2019 TDC-1719-002 32
Itron Mobile Radio User Guide 13. Optimizing Bluetooth® Performance