User's Guide
Table Of Contents
- Table of Contents
- Itron Mobile Radio compliance
- 1. Introduction
- 2. About Your Itron Mobile Radio
- 3. Daily Operation
- 4. LED Status Indicators
- 5. Communication Ports
- 6. Carrying the Portable Itron Mobile Radio
- 7. Installing the IMR-XA and IMR-FT
- 8. Maintaining your Itron Mobile Radio
- 9. Storing Your Radio
- 10. Battery Basics
- 11. Safety
- 12. Troubleshooting
- 13. Optimizing Bluetooth® Performance
- 14. Itron Mobile Radio Capabilities and Limitations
Replacing the Antenna Gasket
Inspect the gasket regularly to verify that it is intact, free from debris, and properly seals the
antenna and base. To maintain the integrity and performance of the antenna, Itron recom-
mends that you replace the gasket located in the antenna base minimally once a year.
For more information about ordering the gasket, log onto Itron Access or contact Itron Sup-
port Services at 1.877.487.6602.
1. Turn the antenna counter-clockwise to remove it from the base.
2. Remove the gasket from the base.
3. Place a new gasket on the base and push it firmly into place.
4. Ensure that the gasket is level with the antenna base to prevent pinching when the antenna
is reconnected.
5. Reconnect the antenna to the base by turning it clockwise until it is firmly seated on the base.
Replacing the Antenna Cable
Itron recommends changing the antenna cable once a year. For more information about
ordering the antenna cable, log onto Itron Access or contact Itron Support Services at
1.877.487.6602.
1. Unscrew the antenna cable from the IMR-XA.
2. Unscrew the antenna cable from the antenna base.
3. Attach the new antenna cable to the antenna base.
4. Attach the antenna cable to the IMR-XA.
14 May 2019 TDC-1719-002 24
Itron Mobile Radio User Guide 8. Maintaining your Itron Mobile Radio