User's Guide
Table Of Contents
- Table of Contents
- Itron Mobile Radio compliance
- 1. Introduction
- 2. About Your Itron Mobile Radio
- 3. Daily Operation
- 4. LED Status Indicators
- 5. Communication Ports
- 6. Carrying the Portable Itron Mobile Radio
- 7. Installing the IMR-XA and IMR-FT
- 8. Maintaining your Itron Mobile Radio
- 9. Storing Your Radio
- 10. Battery Basics
- 11. Safety
- 12. Troubleshooting
- 13. Optimizing Bluetooth® Performance
- 14. Itron Mobile Radio Capabilities and Limitations
Note: Servicing the charge base should only be done indoors, at a clean
location, with the radio powered off. Safeguards against static electricity
should be observed.
Removing the IMR-XA Charge Base
Unscrew four screws to remove the charge base from the IMR-XA.
Replacing the Charge Base Antenna Cable
1. Remove the charge base from the IMR-XA.
2. Unscrew the small antenna cable connector (1) from the body of the IMR-XA.
14 May 2019 TDC-1719-002 21
Itron Mobile Radio User Guide 8. Maintaining your Itron Mobile Radio