User's Guide
Table Of Contents
- Table of Contents
- Itron Mobile Radio compliance
- 1. Introduction
- 2. About Your Itron Mobile Radio
- 3. Daily Operation
- 4. LED Status Indicators
- 5. Communication Ports
- 6. Carrying the Portable Itron Mobile Radio
- 7. Installing the IMR-XA and IMR-FT
- 8. Maintaining your Itron Mobile Radio
- 9. Storing Your Radio
- 10. Battery Basics
- 11. Safety
- 12. Troubleshooting
- 13. Optimizing Bluetooth® Performance
- 14. Itron Mobile Radio Capabilities and Limitations
4. Plug in the micro-USB and secure it with the Velcro strap as shown in the following illus-
tration.
5. Attach the power cable and antenna cable to their connectors on the charge base.
Installing on a Pedestal
1. Attach the mounting plate to the mounting jacket in the orientation most useful for your pur-
pose.
2. Use cable ties or some other secure fastener to attach the mounting jacket to the pedestal.
3. Put the IMR in the mounting jacket and engage the plastic side release buckles.
4. Plug in the micro-USB and secure it with the Velcro strap as shown in the following illus-
tration.
5. Attach the power cable and antenna cable to their connectors on the charge base.
14 May 2019 TDC-1719-002 17
Itron Mobile Radio User Guide 7. Installing the IMR-XA and IMR-FT