User's Guide

Installing the Mounting Jacket in the Vehicle
The IMR Mounting Jacket can be installed in a vehicle in several ways. The following pro-
cedures describe three of the possible configurations.
Warning: The primary consideration when installing the IMR Mounting
Jacket is that the IMR be securely attached to the vehicle. Failure to do
so could lead to injury or death from unsecured components during a
sudden stop, rollover, or collision.
Installing on a Seat Belt
1. Put the IMR in the mounting jacket and engage the plastic side release buckles.
2. Ensure the IMR is securely encased in the mounting jacket and tighten the straps if neces-
sary.
3. Attach the mounting jacket to the seatbelt.
4. Plug in the micro-USB and secure it with the Velcro strap as shown in the following illus-
tration.
5. Attach the power cable and antenna cable to their connectors on the charge base.
Installing on a Partition
1. Attach the mounting plate to the mounting jacket in the orientation most useful for your pur-
pose.
2. Use cable ties or some other secure fastener to attach the mounting jacket to the vehicle par-
tition.
3. Put the IMR in the mounting jacket and engage the plastic side release buckles.
14 May 2019 TDC-1719-002 16
Itron Mobile Radio User Guide 7. Installing the IMR-XA and IMR-FT