User's Manual
Table Of Contents
- Contents
- Introduction
- About your Itron Mobile Radio
- Daily operation
- LED status indicators
- Communication Port
- Carrying the Itron Mobile Radio
- Maintaining your Itron Mobile Radio
- Storing your radio
- Battery basics
- Safety
- Troubleshooting
- Optimizing Bluetooth® performance
- Itron Mobile Radio Capabilities and Limitations
Chapter 2 About your Itron Mobile Radio
When you unpack your radio, make sure you have all of the components listed in the
following table. If any are missing, contact Itron Support Services immediately.
An optional Radio Carrying Kit is available for order separately. The Radio Carrying Kit
contains a belt clip and a shoulder harness.
After you install the battery, charge the radio to 100 percent capacity before using it.
Complete charging takes about six hours. For more information about the battery, see
Battery Basics on page 10.
Itron Mobile Radio parts list
The Itron Mobile Radio comes with the following items.
Itron Mobile Radio with built-in antenna
AC power adapter AC wall plug with USB type A port.
Communication and charging cable USB cable.
Documentation
Itron Mobile Radio Quick Reference Guide
Itron Mobile Radio Compliance Statement
(Optional) Belt clip and shoulder harness Included if the optional Radio Carrying Kit is
ordered.
Charging the battery
1. Plug the USB cable into the radio.
2. Plug the USB cable into a PC, an AC wall adapter, or a 12V DC car adapter.
3. Allow the radio to charge for at least six hours before you use it or store it.
Installing the battery
1. Insert the battery into the compartment.
• Make sure the battery label is facing the ridges on the radio case.
• Make sure the wires are along the same side as the connector.
• Make sure the removal tab is facing out.
Itron Mobile Radio User Guide TDC-1719-000 2
Proprietary and Confidential