G5R1 Module for the Itron Electricity Meter Technical Reference Guide Effective Date: June, 2020 G5R1 Communications Module
Revision History The following table describes the changes to this document for each revision of the CAT1 module: Revision A Date Description of Change June, 2020 Initial Release G5R1 Communications Module
Labeling The following requirements will be applied to any products that use these modules: The GEN5 RIVA meter or host label will include the following text for the G5R1 module: • Contains: • FCC ID: SK9G5R1, IC: 864G-G5R1, Model: G5R1 The user’s manual for any product that contains this modules will contain the following text. If the device is large enough, then this will also be placed on the label. “This device complies with Part 15 of the FCC Rules.
FCC Part 15, Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure (FCC/ISED) The user’s manual for any product that contains this module will contain the following text: “This equipment complies with radiation exposure limits set forth as a mobile classification for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Modification and Repairs To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted.
Installation The G5R1 module will be assembled into Itron meters. In the following picture, shown are G5R1 register board module, the display, and a plastic cover. The plastic cover and LCD will be assembled onto the back side of the register board module.
Assemble the G5R1 module with metrology base. In the following picture, a 2S base is shown.
The G5R1 module and metrology base were connected a board to board connector.
Cover up the plastic to complete the assembly: G5R1 Communications Module
