User Manual

DRAFT
Chapter 2 - Installation Considerations 11
Grounding
Grounding
The CCU4 collector does not require an earth ground connection because the unit is sealed and
encased in plastic.
Unpacking the CCU4 Collector
Remove the CCU4 collector from its shipping container and verify the protective foam pieces are
not severely damaged. If these pieces are damaged, and the collector has significant visible
damage, it may not function correctly.
Important The collector must remain protected at all times prior to installation. After
unpacking the collector to configure it prior to installation, save the packing container and
packing materials to use again when transporting the unit to its location in the field. After
installing the collector, save the container and materials for transport in the event the
collector malfunctions and must be shipped to Itron for repair.
Packing Lists
The following parts are included in each container:
CDPD Version (part #CCU-4011-001)
POTS Version (part # CCU-4012-001)
Table 1: CDPD Version Packing List
Quantity Part Description Part Number
1 Battery pack BAT-0019-001
1 CDPD antenna MSE-0105-001
1 RF antenna MSE-0104-001
1 CCU4 collector CCU-4011-001
Table 2: POTS Version Packing List
Quantity Part Description Part Number
1 Battery pack BAT-0019-001
1 POTS cable CBA-0167-001
1 RF antenna MSE-0104-001
1 CCU4 collector CCU-4012-001