User's Manual

DRAFT
Chapter 3 - Eight-Channel Repeater Installation 19
TDC-0613-003b 03/06
Chapter 3
Eight-Channel Repeater Installation
Getting Started
Overview This chapter shows you how to install an eight-channel repeater in the field. Your
repeater installation process will depend on the type of repeater (pole-mount or
decorative mount) and the installation location.
For more information, see:
• Installing Pole-Mount Repeaters on page 19
• Installing Decorative-Mount Repeaters on page 24
Installing Pole-Mount Repeaters
Overview A pole-mount repeater mounts on a streetlight davit at least 3 inches behind the
lamp, which allows for clearance to change the light bulb in the lamp.
Required Hardware
and Tools
A pole-mount repeater installation requires the following tools and hardware:
• Adjustable Mounting Kit (CFG-003-002)
• 7/16-inch nut driver, wrench, or ratchet-wrench
• Inch-pound torque wrench with 7/16-inch and 1/2-inch sockets
Adjustable Mounting Kit, unassembled