User's Manual

DRAFT
Chapter 2 - Single-Channel Repeater Installation 15
TDC-0613-003b 03/06
Installing Sleeve-Mount Repeaters
Installing on a
Ringed Meter Socket
A ringed meter socket uses a meter sealing ring to secure the meter to the socket.
To install a repeater on a ringed meter socket, do the following steps.
Step Action
1 Remove tamper seals.
2 Verify that the service is compatible with the repeater.
3 Remove the meter seal ring.
4 Pull the meter from the socket.
5 Insert the repeater sleeve into the meter socket.
6 Remove the protective label from the double-sided tape on the bottom
of the antenna (the antenna and antenna cover are one unit).
IMPORTANT Be careful to not damage or remove the tape.
7 Attach the antenna/antenna cover unit to the top of the sleeve.
IMPORTANT Ensure that it is attached forward against the shoulder and
centered on the flat area on the top of the sleeve.
Repeater
Antenna/antenna
cover attached