User's Manual

DRAFT
14 Repeater Installation Guide
TDC-0613-003b 03/06
Installing Sleeve-Mount Repeaters
9 Secure the tension band around the repeater and antenna, pulling to
tighten. Ensure that the back lip of the antenna is under the tension
band.
10 Tighten the tension band using a tension setting tool.
11 Clip off any excess material from the tension band.
12 Snap the meter into the repeater socket.
13 Attach and tighten the meter ring, making sure to catch the antenna
cover lip under the ring band.
14 Install a tamper seal in the ring band and on the meter socket lid.
Step Action
Antenna
(top view)
Tension band
Antenna
cover lip
Meter ring