User's Manual

DRAFT
Chapter 2 - Single-Channel Repeater Installation 13
TDC-0613-003b 03/06
Installing Sleeve-Mount Repeaters
6 Replace the meter socket lid.
NOTE If needed, trim the breakaway rim on the repeater sleeve using
diagonal cuts so that the socket lid will fit over the repeater.
7 Remove the protective label from the double-sided tape on the bottom
of the antenna (the antenna and antenna cover are one unit).
IMPORTANT Be careful to not damage or remove the tape.
8 Attach the antenna to the top of the sleeve.
IMPORTANT Ensure that it is attached forward against the shoulder and
centered on the flat area on the top of the sleeve.
Step Action
Antenna/antenna
cover attached