Installation Guide

Antenna Gasket Replacement
Inspect the gasket regularly to verify that it is intact, free from debris, and properly seals the
antenna and base. To maintain the integrity and performance of the antenna, Itron recommends
that you replace the gasket located in the antenna base minimally once a year.
For more information about ordering the gasket, log on to Itron Access or contact Itron Support
Services at 1-877-487-6602. The replacement gasket part number is MSE-0210-001, which
includes six gaskets.
Replacing the Antenna Gasket
1. Turn the antenna counter-clockwise to remove it from the base.
2. Remove the gasket (1) from the base (2).
3. Place a new gasket on the base and push it firmly into place.
4. Ensure that the gasket is level with the antenna base to prevent pinching when the antenna
is reconnected.
5. Reconnect the antenna to the base by turning it clockwise until it is firmly seated on the base.
Vehicle Preparation and Hardware Installation Guide 4 Mobile Collector System Maintenance
16 February 2021 815-0207-00 REV 001 Itron, Inc. Page 44 of 44