Installation Guide

8. Tighten the hex nut until the gasket on the base of the antenna compresses to 50% of its
original thickness.
9. Complete cable routing in the vehicle and secure the cables.
10. See Antenna and Antenna Mounting Base Connection on page 14.
Antenna and Antenna Mounting Base Connection
Now you must connect the antenna to the antenna mounting base.
Connecting the Antenna to the Antenna Mounting Base
1. Place the antenna gasket on the antenna mounting base. The gasket is shipped in a plastic
bag with the antenna.
2. Press the antenna onto the thread nut of the antenna mounting base.
3. Rotate the antenna clockwise until it is firmly in place.
Vehicle Preparation and Hardware Installation Guide 2 Vehicle Preparation
16 February 2021 815-0207-00 REV 001 Itron, Inc. Page 14 of 44