User's Manual Part 2

Chapter 2 Using the Mobile Collection 2.x System
Attach the GoBook MAX to the Mobile Collector
Follow these steps to mount the GoBook MAX onto the Mobile Collector.
Before attempting to mount the GoBook onto the Mobile Collector, be sure to
unlock the locking mechanism.
To attach the GoBook MAX to the Mobile Collector
1. From the driver’s side of the vehicle, align the GoBook MAX with the four mounting
guides on top of the Mobile Collector.
2. Angle the top of the GoBook MAX towards the passenger door, as shown below, and
lower it so that the two rear connectors (1) on the Mobile Collector top fit into the
mating holes on the GoBook MAX underside.
3. Lower the GoBook MAX onto the Mobile Collector within the mounting guides (2)
until the underside of the GoBook MAX is flush with the top of the Mobile Collector.
If necessary, gently move the GoBook MAX slightly from side to side to ensure the
connectors on top of the Mobile Collector mate with those on the underside of the
GoBook MAX.
36 Hardware Installation Guide