User's Manual Part 2

Chapter 3 Using the EkaNet System
8. Connect the other end of the power cable to the port on the bottom of the radio. Note
that in the following example, the pouch, vehicle, and other cables have been removed
for emphasis.
9. Connect the serial cable to comm 1 serial port on the laptop (or dock); this is the end
without pins. Be sure to securely connect the cable.
• For the GoBook XR-1, the serial port is located on the right-hand side of the
laptop (9-pin male connector).
• For the GoBook III, the serial port is located on the back of the laptop (9-pin
male connector).
52 Hardware Installation Guide