User's Manual Part 2

Installing the EkaNet System
Installing the EkaNet System
Follow the steps below to connect the EkaNet system.
To connect the EkaNet system
1. Attach the external EkaNet antenna to the top of the vehicle. It should be placed at
least four (4) feet away from the main Mobile Collector RF antenna to prevent
interference.
This antenna uses a powerful magnet to attach to the vehicle.
2.
Using a magnetic-mount antenna on a fiberglass-roofed vehicle is not
recommended. The antenna may come loose during transit and be
damaged. It could also be a hazard to others if it falls of the roof of a moving
vehicle.
Hardware Installation Guide 49