User's Manual Part 2

Chapter 2 Using the Mobile Collection 2.x System
Removing the Mobile Collection 2.x System
At some point, you may need to remove the Mobile Collection system from the vehicle.
Perform the following tasks to remove the Mobile Collection system.
Before removing any Mobile Collection system components be sure to stop the
Mobile Interface and shut down the GoBook.
Unlock and Remove the GoBook
Follow these steps to remove the GoBook from the Mobile Collector or vehicle cradle. The
following procedure can be used with either the GoBook MAX or GoBook III.
To unlock and remove the GoBook
1. Shut down any open applications and then shut down the GoBook.
2. Close the GoBook screen.
3. Disengage the GoBook locking mechanism:
• GoBook MAX Insert the key in the locking mechanism and turn it counter-
clockwise. Pull the key and the mounting lock towards you so the locking
mechanism is disengaged from the GoBook.
-> If unlocking the GoBook MAX from the vehicle cradle, push in underneath
the locking mechanism and then pull the mechanism out.
44 Hardware Installation Guide