User's Manual Part 2

Installing the Mobile Collection 2.x System
To insert the flash card
1. Hold the flash card as shown to insert it into the Mobile Collector Flash Card Reader.
2. Insert the card in the flash card reader slot and press it in until it is firmly in place and
the eject button pops out.
Remove the Flash Card
Follow these steps to remove the flash card.
Before removing the flash card, shut down the GoBook. Failure to do so could
result in data loss on your flash card.
To remove the flash card
1. Shut down the GoBook.
2. Press the eject button on the flash card reader.
3. Gently pull the flash card out of the flash card reader slot.
Hardware Installation Guide 43