User's Manual Part 2

Chapter 2 Using the Mobile Collection 2.x System
This ensures data communication between the GoBook III and the Mobile Collector
radio while you are driving a route.
Using the Flash Card in Mobile Collector 2.x Systems
You can import route files to the Mobile Interface database and export the collected data
using a removable flash card in the Mobile Collector flash card reader.
The default drive letter for the flash card reader will vary, depending
on the type of GoBook used in your system configuration.
• GoBook MAX When using the GoBook MAX, the card reader
defaults to drive
F:.
• GoBook III When using the GoBook III (which may include an
optional 3-slot external reader), the card reader can be any of the
following drives: G:, H:, and I:. The actual letter used will vary
depending on when various peripherals are connected to the
system. Always ensure you are accessing the proper drive.
Insert the Flash Card
Follow these steps to insert the flash card.
WARNING! If you do not hold the flash card correctly, the flash
card will not insert into the reader. Forcing the flash card into the
reader may damage the reader by bending the connector pins.
42 Hardware Installation Guide