User's Manual Part 2

Installing the Mobile Collection 2.x System
5. Turn the key clockwise to lock the GoBook MAX in place.
Remove the key from the lock so that it is not accidently broken or stolen.
6. Plug the vehicle dock cable into a vehicle dock USB port. Two USB ports are located
on the back of the vehicle dock.
7. Plug the vehicle dock cable into the Mobile Collector radio by pulling the SMA
connector sleeve back, plugging the connector in to the Mobile Collector as shown,
and releasing the sleeve.
Attach the GoBook III to the Vehicle Dock
As part of an optional remote installation, you may attach the GoBook III to a vehicle cradle
on a pedestal near the driver. The vehicle cradle should be pre-installed. Refer to the
Itronix
Vehicle Cradle Installation Guide
for detailed instructions.
To attach the GoBook III to the vehicle dock
1. Lower the GoBook III onto the vehicle dock. Be sure to align it within the front and
read guides on the dock. The front of the laptop should face the locking mechanism on
the front of the dock.
2. Push in the handle on the front of the dock to engage the locking mechanism and
secure the GoBook to the dock.
3. Push in the keyed part of the locking mechanism to further lock it and prevent theft of
the GoBook.
4. Plug one end of the USB cable into one of the two available ports on the back of the
vehicle dock. The port uses a standard USB connector.
Hardware Installation Guide 39