User's Manual Part 1

Removing the MC3 System
Removing the MC3 System
At some point, you may need to remove the Mobile Collection system from the vehicle.
Before removing any Mobile Collection system components, be sure to
stop the Mobile Interface software, shut down the GoBook, and turn off
the vehicle power. See the
Mobile Collection User's Guide (TDC-0380-
xxx)
for more information.
To remove the GoBook from the vehicle dock
1. Stop processing reads.
2. Complete routes.
3. Export routes.
4. Shut down all open applications and then shut down the GoBook.
CAUTION If you accidently disconnect the GoBook from the MC3
radio before shutting down Windows and the laptop, the following
message appears:
Unsafe Removal of Device
Before clicking OK, clear the ShowUnplug/Eject icon on the Taskbar
box. If you do not clear this box, you will not be able to properly shut
down the system in the future.
5. Close the GoBook screen.
6. Turn off the vehicle.
7. Disconnect any cables attached directly to the GoBook.
8. If unlocking the GoBook from the vehicle cradle:
• GoBook XR-1 Push the locking mechanism in and slide it toward the keys on
front of the dock (1), and then push it in a little further and pull it back to the
starting position to unlock the dock (2).
Hardware Installation Guide 25