User's Manual Part 1

Installing the MC3 System
• Bucket Seat Extend the mounting straps from the driver-facing side of the
vehicle mount (1), and then wrap them around the seat back and buckle them to
the opposite side of the vehicle mount (2).
• Bench Seat Connect the optional bench-seat straps to the buckles on the
bottom of the vehicle mount.
Push the free ends of the straps between the seat cushion and the seat back (1),
and then extend them up and over the top of the seat back and connect them to
the buckles on the top of the vehicle mount (2).
3. Tighten the straps until the MC3 is snug against the seat back.
Hardware Installation Guide 11