User's Manual Part 1

Chapter 1 Using the MC3 System
• Secure it in place by buckling the two diagonal corner straps (1).
2. Strap the mount to either the front or the back of the passenger-side seat back.
Position the unit within the mount so that when it is strapped to the seat back, the
unit's connectors face
toward the passenger-side door.
• Sled Systems If you will be installing a sled, be sure to mount the MC3 high
enough on the seat back so that the sled and laptop will fit beneath the radio on
the seat.
• Pedestal Systems If you will be attaching the GoBook to a dock on a pedestal,
the MC3 radio can be attached lower on the seat. This configuration is shown in
the following examples.
Depending on whether the vehicle has a separate passenger-side bucket seat or a
bench seat, do one of the following:
10 Hardware Installation Guide