User's Manual Part 1

Chapter 1 Using the MC3 System
ID Description
2 PCMCIA slot
3 CD drive
The compact flash card should come installed from the factory. If it is not installed or you
wish to replace cards, use the following procedures.
To insert the flash card adapter
1. Slide the flash card into the PCMCIA adapter.
2. Open the CD drive / PCMCIA slot compartment on the right-hand side of the
GoBook.
3. Slide the adapter into the PCMCIA slot on the GoBook until it clicks into place.
To remove the flash card adapter
1. Open the CD drive / PCMCIA slot compartment on the right-hand side of the
GoBook.
8 Hardware Installation Guide