User's Manual Part 1

Installing the MC3 System
2. Angle the front of the GoBook down, toward the front of the dock (where the key and
locking mechanism are). Notice the connectors and guide posts (1) near the back of
the sled base. These help ensure proper placement of the GoBook.
3. Push the back of the laptop down on to the connectors.
4. When the laptop is in place, engage the dock locking mechanism to secure the
connectors to the laptop and prevent it from moving.
5. Push the keyed mechanism in on the front of the dock to further secure the GoBook to
the dock. This helps prevent the GoBook from being stolen. (Use the supplied key to
release the lock later.)
Using the PCMCIA Flash Card Adapter
The GoBook has a PCMCIA slot that, with an adapter, you can use to read compact flash
cards.
The PCMCIA slot is on the right side of the GoBook, just below the CD drive.
ID Description
1 Front of the GoBook XR-1
Hardware Installation Guide 7