User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Chapter 4 System Maintenance
74 Hardware Installation Guide
Mobile Collector 2.x Power Adapter
(Bulletin Issued September 8th, 2006)
In the interest of continuous improvement, Itron has incorporated a reliability upgrade in
your Mobile Collector. Reliability of the existing power connector has become the number
one cause of Mobile Collector returns during the past year. As a result, we are replacing the
existing power connector with a new power connector that has tested to have improved
reliability and durability.
Along with the new power connector in your RF unit, we have included a new power cable
with new power connectors. It is imperative that you use the new power cable with your RF
unit. The old power cable will not lock into place with the new power connector.
The new power cable was designed to be easily distinguishable from the existing power
cable by placing a red and blue overmold on the connectors. A notice label was placed on
the chassis of the RF unit to remind you of this requirement.