User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Chapter 3 Using the EkaNet System
62 Hardware Installation Guide
Laptop
Radio Version
EkaNet Compatible?
GoBook MAX
MC3
No
GoBook III
2.5
Yes
GoBook III
MC3
Yes
GoBook XR-1
2.5
Yes
GoBook XR-1
MC3
Yes
About the EkaNet Components
The following components are a part of the optional EkaNet system. These components
need to be installed in the vehicle.
ID
Item
Description
1
EkaNet radio
Routes data received by the antenna to the laptop
running the Mobile Interface software, with EkaNet
software enabled.
2
Radio pouch
Secures the radio in the vehicle. The pouch connects to
the MC3 radio harness.
3
EkaNet antenna
Receives data from Eka-enabled endpoints in the field.
The antenna should be installed 4 feet away from the
main Mobile Collection RF antenna.
* Not
Pictured
Cables
A power cable from the Mobile Collection junction box
supplies the radio with power.
A serial cable from the radio to the laptop transfers
data.