User's Manual

Chapter 2 Using the Mobile Collection 2.x System
50 Hardware Installation Guide
GoBook III Disconnect any cables from the back of the GoBook III. Pull the
locking mechanism out, away from the GoBook III.
-> If unlocking the GoBook III from the vehicle dock, push up and in on the
underside of the locking mechanism, and then pull the mechanism out to release
it.
4. Gently lift the GoBook up and away from the Mobile Collector radio or vehicle dock.
CAUTION If you accidently disconnect the GoBook from the MC3
radio before shutting down Windows, the following message appears:
Unsafe Removal of Device
Before clicking OK, clear the ShowUnplug/Eject icon on the Taskbar
box. If you do not clear this box, you will not be able to properly shut
down the system in the future.
Disconnect the Cables
Unplug the cables from the Mobile Collector and leave them for the next installation of a
Mobile Collection system, if desired.
To disconnect the cables
1. Complete Unlock and Remove the GoBook on page 49.
2. Unplug the cables from the Mobile Collector. This includes the USB cable, power
cable, and any antenna cables.
Remove the Mobile Collector from the Sled
When you attached the Mobile Collector to the sled, a locking pin snapped into the
underside of the Mobile Collector. To remove the Mobile Collector, you must reach
underneath the top of the sled and pull down on the locking pin while rotating the Mobile
Collector slightly.