User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Chapter 2 Using the Mobile Collection 2.x System
46 Hardware Installation Guide
3. Plug the USB cable into the Mobile Collector radio by pulling the SMA connector
sleeve back, plugging the connector in to the Mobile Collector as shown, and
releasing the sleeve.
4. Connect the USB cable to the back of the GoBook III as shown below.
5. Route the USB cable through the channel on the back of the Mobile Collector radio
mounting guide. Press the cable down into the channel to make sure it is secure.