User's Manual

Installing the Mobile Collection 2.x System
Hardware Installation Guide 41
2. Angle the top of the GoBook MAX towards the passenger door, as shown below, and
lower it so that the two rear connectors (1) on the Mobile Collector top fit into the
mating holes on the GoBook MAX underside.
3. Lower the GoBook MAX onto the Mobile Collector within the mounting guides (2)
until the underside of the GoBook MAX is flush with the top of the Mobile Collector.
If necessary, gently move the GoBook MAX slightly from side to side to ensure the
connectors on top of the Mobile Collector mate with those on the underside of the
GoBook MAX.
4. Insert the key into the mounting lock and press the locking mechanism so it engages
the GoBook MAX.
5. Turn the key clockwise to lock the GoBook MAX in place.
6. Remove the key from the lock so that it is not stolen or accidently broken.
7. Lift the GoBook MAX screen up and gently push it back so that it rests on the Mobile
Collector screen rest.
Attach the GoBook III to the Mobile Collector
Follow these steps to mount the GoBook III onto the Mobile Collector.