User's Manual

Chapter 2 Using the Mobile Collection 2.x System
40 Hardware Installation Guide
If the power cable does not reach the Mobile Collector, use the optional extension
cable to extend the length (extension cables may be purchased from Itron). Plug
the power cable into one end of the extension cable and plug the other end of the
extension cable in to the Mobile Collector. Be sure both ends snap into their
respective connectors.
3. Attach the GPS cable to the connector. Both the end of the cable and the connector are
gold-plated for easy identification.
Attach the GoBook to the Mobile Collector 2.x
This section shows you how to connect both the GoBook MAX and GoBook III to the
Mobile Collector radio. The GoBook may be either attached directly to the Mobile
Collector radio or attached to a vehicle cradle mounted on a pedestal by the driver (for more
information, see GoBook Mounting Systems on page 36).
To attach the GoBook to the Mobile Collector, follow the steps in one of the following
sections:
GoBook MAX Procedures
GoBook III Procedures
Attach the GoBook MAX to the Mobile
Collector on page 40
Attach the GoBook III to the Mobile
Collector on page 41
Attach the GoBook MAX to the Vehicle
Dock on page 43
Attach the GoBook III to the Vehicle
Dock on page 44
Attach the GoBook MAX to the Mobile Collector
Follow these steps to mount the GoBook MAX onto the Mobile Collector.
Before attempting to mount the GoBook onto the Mobile Collector, be sure to
unlock the locking mechanism.
To attach the GoBook MAX to the Mobile Collector
1. From the driver’s side of the vehicle, align the GoBook MAX with the four mounting
guides on top of the Mobile Collector.