User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Chapter 1 Using the MC3 System
28 Hardware Installation Guide
The USB cable (both XR-1 and GoBookIII docks).
The power cable that is hard-wired to the dock for GoBookIII installations.
4. Unplug the cables from the sled or pedestal junction box.
5. Release the mounting clips on the MC3 harness and remove the MC3 radio.
6. Unbuckle the seat belt securing the sled to the passenger seat and remove the sled
from the vehicle. Leave the pretenstioner attached to the seat belt.