User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Removing the MC3 System
Hardware Installation Guide 27
GoBook XR-1 Push the locking mechanism in and slide it toward the keys on
front of the dock (1), and then push it in a little further and pull it back to the
starting position to unlock the dock (2).
GoBook III Push in underneath the locking mechanism (1) and then pull the
handle out (2) as shown.
9. Gently lift the GoBook up and away from the cradle.
Disconnecting the Cables
Disconnect the cables from the MC3 and leave them in the vehicle for the next installation
of the system.
To disconnect the cables
1. Complete the procedure To remove the GoBook from the vehicle dock on page 26.
2. Unplug the cables from the MC3 radio.
3. Unplug all the cables from the GoBook dock EXCEPT for: