User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Installing the MC3 System
Hardware Installation Guide 19
To connect the antenna
Connect the omni-mount RF antenna cable to the MAIN ANTENNA connector on the
MC3. Be sure to properly tighten the connector; a loose connection can lead to poor
radio and read performance.
When using older antenna cables with type N connectors along with the
MC3 radio, a type N to TNC adapter is required; this adapter is included
in the MC3 kit.
Attach the adapter securely to both the antenna cable and MC3 to ensure
optimal radio performance. Should you need another adapter or are not
able to locate the adapter in the ship kit, you will need to contact your
Itron representative or Customer Service (1.800.635.8725) to place an
order for an adapter (part number CON-0419-001).
Connecting Side-Looker Antennas
The MC3 radio supports an additional set of antennas that help gather additional reads from
endpoints located on the sides of the vehicle.
The side-looker antennas are an optional component of the MC3 system that can help
improve read coverage in certain situations (contact your Itron representative for more
information). Two additional antennas are connected to one antenna base, which is then
installed on the vehicle.