User's Manual
Table Of Contents
- Using the MC3 System
- Using the Mobile Collection 2.x System
- About the Mobile Collection 2.x System
- GoBook Mounting Systems
- Installing the Mobile Collection 2.x System
- Removing the Mobile Collection 2.x System
- Upgrading to a GoBook XR-1 Laptop
- Using the EkaNet System
- System Maintenance
Installing the MC3 System
Hardware Installation Guide 17
To connect power to the GoBook dock
1. Plug the red and blue end of the cable into the LAPTOP DOCK receptacle on
junction box. Pull the silver tab on the power cable back, insert the connector into the
junction box, twist the connector so the silver tab lines up with the labeling on the
junction box, and release the tab to lock it into place.
2. Plug the pigtail end into the dock connector.